Differences
This shows you the differences between two versions of the page.
| Next revision | Previous revision | ||
| filereference:output:surface [2020/07/20 13:53] – created enviadmin | filereference:output:surface [2021/11/11 20:27] (current) – enviadmin | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| ====== Output Files: Surface/ | ====== Output Files: Surface/ | ||
| + | <fs smaller> | ||
| + | </fs> | ||
| - | //***Work in Progress...***// | ||
| - | + | <WRAP box left 99%> | |
| - | <WRAP box left 80%> | + | |
| <WRAP box left 40%> | <WRAP box left 40%> | ||
| ^ Dimension ^ Nr Variables ^ Format ^ | ^ Dimension ^ Nr Variables ^ Format ^ | ||
| Line 10: | Line 10: | ||
| </ | </ | ||
| - | **Radiation | + | **Surface/ Flux Data** |
| - | Contains the state of the soil surface as an interface between the atmosphere and the soil model. | + | Contains the state of the soil surface as an interface between the atmosphere and the soil model. It contains both the state of the surface (e.g. temperature) as well as turbulent fluxes into the air and molecular fluxes into the soil. |
| </ | </ | ||
| Line 20: | Line 20: | ||
| The surface data files are produced each main output interval (default: 60 min) and represent the general state of the surface at the given model time. | The surface data files are produced each main output interval (default: 60 min) and represent the general state of the surface at the given model time. | ||
| - | <WRAP box left 80%> | + | <WRAP box left 99%> |
| ==== Variable list ==== | ==== Variable list ==== | ||
| Line 27: | Line 27: | ||
| | |**Variable** |**Unit** |**Description** | | | |**Variable** |**Unit** |**Description** | | ||
| - | | |Index Surface Grid| - | Description | + | | |Index Surface Grid| - | k grid index in which the surface is located (=0 if no DEM is used) | |
| - | | |Soil Profile Type| - | Description| | + | | |Soil Profile Type| - | Integer Index to the soil profile type used. An additional .SLDX file is generated to be used with LEONARDO to visiualise this information| |
| - | | |z Topo| m | Description| | + | | |z Topo| m | Terrain height (relative to reference level)| |
| - | | |Surface inclination| ° | Description| | + | | |Surface inclination| ° | Inclination of surface if a DEM is used| |
| - | | |Surface exposition| ° | Description| | + | | |Surface exposition| ° | Surface exposition (azimuth) if a DEM is used| |
| - | | |Shadow Flag| - | Description| | + | | |Shadow Flag| - | =1 if surface is shaded (max 2% of direct radiation), 0 otherwise| |
| - | | |T Surface | °C | Description | + | | |T Surface | °C | Absolute surface temperature |
| - | | |T Surface Diff.| K | Description| | + | | |T Surface Diff.| K | Difference surface temperature to reference surface |
| - | | |T Surface Change | K/h | Description| | + | | |T Surface Change | K/h | Heating/ |
| - | | |q Surface| g/kg | Description| | + | | |q Surface| g/kg | Spec. Humidity of surface air layer (=air humidity if surface is sealed)| |
| - | | |uv above Surface| m/s | Description| | + | | |uv above Surface| m/s | Horizontal wind speed in layer directly above the surface| |
| - | | |Sensible heat flux| W/m² | Description| | + | | |Sensible heat flux| W/m² | Sensible Heat Flux H (positive if from surface towards air)| |
| - | | |Exchange Coeff. Heat| m²/s | Description | + | | |Exchange Coeff. Heat| m²/s | Turbulent surface exchange coefficient for heat | |
| - | | |Latent heat flux| W/ | + | | |Latent heat flux| W/ |
| - | | |Soil heat Flux | W/ | + | | |Soil heat Flux | W/ |
| - | | |Q_Sw Direct| W/ | + | | |Q_Sw Direct| W/ |
| - | | |Q_Sw Direct Horizontal| W/ | + | | |Q_Sw Direct Horizontal| W/ |
| - | | |Q_Sw Diffuse Horizontal| W/ | + | | |Q_Sw Diffuse Horizontal| W/ |
| - | | |Q_Sw Reflected Received Horizontal| W/ | + | | |Q_Sw Reflected Received Horizontal| W/ |
| - | | |Lambert Factor| - | Description| | + | | |Lambert Factor| - | Relative insolation for the actual surface expostion and solar angle| |
| - | | |Q_Lw emitted| W/ | + | | |Q_Lw emitted| W/ |
| - | | |Q_Lw budget| W/ | + | | |Q_Lw budget| W/ |
| - | | |Q_Lw Sum all Fluxes| W/m² | Description| | + | | |Q_Lw Sum all Fluxes| W/m² | Sum of all incomming longwave radiation| |
| - | | |Water Flux| g/m² | Description| | + | | |Water Flux| g/m² | Water flux from the surface to the air| |
| - | | |Sky-View-Faktor| - | Description | + | | |Sky-View-Faktor| - | Sky View Factor |
| - | | |Building Height| m | Description| | + | | |Building Height| m | Building height if a building is on the grid (for display of maps)| |
| - | | |Surface Albedo| - | Description| | + | | |Surface Albedo| - | Surface albedo| |
| - | | |Deposition Speed| mm/s | Description| | + | | |Deposition Speed| mm/s | Deposition speed for selected particulate matter| |
| - | | |Mass Deposed| µg/m² | Description| | + | | |Mass Deposed| µg/m² | Mass of particulate matter deposed over time| |
| - | | |z node Biomet| - | Description| | + | | |z node Biomet| - | Ref node index for 1.8 m level| |
| - | | |z Biomet| m | Description | + | | |z Biomet| m | Actual height of ref node in this model | |
| - | | |T Air Biomet| °C | Description| | + | | |T Air Biomet| °C | Air temperature at ref node| |
| - | | |q Air Biomet| g/kg | Description| | + | | |q Air Biomet| g/kg | Air humidity at ref node| |
| - | | |TMRT Biomet| °C | Description| | + | | |TMRT Biomet| °C | TMRT at ref node| |
| - | | |Wind Speed Biomet| m/s | Description| | + | | |Wind Speed Biomet| m/s | Wind speed at ref node| |
| - | | |Mass Biomet| ug/m³ | Description| | + | | |Mass Biomet| ug/m³ | Particulate matter at ref node| |
| - | | |Receptors| - | Description| | + | | |Receptors| - | Flag for receptors| |