====== 1D-Model Files ======

ENVI-met runs a one-dimensional model parallel to the main (3D) model in order to have produce different initial and boundary conditions.\\
The state of the 1D model is saved each time the main data of the model are saved. These files are written in simple ASCII format and you can find them in the ''\inflow'' folder.

**''(output folder)\Inflow\Inflow MySim <time> <date>.1D''**

===== What is in the files? =====

^NR        ^FIELD         ^UNIT           ^ MEANING^ 
|1         |z             |m              |Height of Data|
|2         |u             |m/s            |Wind Speed u-component|
|3         |v             |m/s            |Wind Speed v-component|
|4         |T             |K              |Air Temperature|
|5         |q             |g/kg           |Specific Humidity Air|
|6         |Ri            |-              |Richardson Number|
|7         |Km            |m²/s           |Exchange Coefficient Impulse|
|8         |E             |m²/s²          |Turbulent Kinetic Energy|
|9         |eps           |m<sup>3</sup>/s²          |Dissipation of TKE|
|10        |E_prod        |-              |Production of E|
|11        |E_therm       |-              |Thermal E Production|
|12        |E_trans       |-              |Transport of E|
|13        |Km_limit      |m²/s           |Limit of Km if using E-eps Model|
|14        |L_diag        |m              |Mixing Length calculated using the Diagnostic Approach|
|15        |L_prog        |m              |Mixing Length calculated from the E/eps Data|